OUTSIDE REARVIEW MIRROR
| 1. |
Remove the outside rearview mirror
cover.
|
| 2. |
Loosen the mounting bolts, disconnet the
connector and then remove the outside rearview mirror.
Tightening
torque:
7~11 Nm (70~110 kg•cm, 5~8
lb•ft)
|
|
| 3. |
Installation is the reverse of
removal. |
INSIDE REARVIEW MIRROR
| 1. |
Remove the rearview mirror.
|
| 2. |
Installation is the reverse of
removal. |
|
Wear gloves to remove and install the mirror
holder. |
| 1. |
Insert a flat tip screwdriver between the
outside rear view mirror holder and mirror assembly.
|
When prying with a flat tip screwdriver,
wrap it with a shop towel to prevent
damage. | |
| 2. |
Remove the outside rear view mirror actuator
from outside rear view mirror housing.
|
| 3. |
Installation is the reverse of
removal. | |
